No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Administrator Guide

OceanStor V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, 6800 V3, 18500 V3, and 18800 V3. Routine maintenance activities are the most common activities for the storage device, including powering on or off the storage device, managing users, modifying basic parameters of the storage device, and managing hardware components. This document is intended for the system administrators who are responsible for carrying out routine maintenance activities, monitoring the storage device, and rectifying common device faults.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Migrating a Storage System AD Domain (Applicable to V300R006C30 and Later)

Migrating a Storage System AD Domain (Applicable to V300R006C30 and Later)

This section describes how to migrate the AD domain for a storage system.

Context

  • After the AD domain on the user network is migrated, the storage system must exit from the original AD domain and be added to the new AD domain.
  • If the storage system is configured with cross-protocol user mappings before AD domain migration, the mappings will become invalid after the storage system is added to the new AD domain. You need to configure the mappings again.
  • If the storage system creates AD domain user quota before AD domain migration, the quota will become invalid after the storage system is added to the new AD domain. You need to create the quota again.
  • After the storage system is added to the new AD domain, users of the new AD domain can perform operations in the CIFS shared directory and have the same operation permissions as those of the original AD domain.

Procedure

  1. Log in to the CLI of the storage system and run the change domain ad_config sid_history_enable=yes command to enable the AD domain migration function.

    If the message Command executed successfully is displayed, the function is enabled successfully. If it is not, perform operations as prompted and enable the AD domain migration function again.

    admin:/>change domain ad_config sid_history_enable=yes 
    Command executed successfully.

  2. Exit the original AD domain.

    1. Log in to DeviceManager.
    2. Choose Settings > Storage Settings > File Storage Service > Domain Authentication.

    3. In the AD Domain Settings area, enter Domain Administrator Username and Password.
    4. Click Exit Domain.

      The Success dialog box is displayed.

    5. Click OK to exit the AD domain.

  3. Add the storage system to the new AD domain.

    For details, see section "Configuring a Storage System to Add It to an AD Domain" in the Basic Storage Service Configuration Guide for File corresponding to your product.

  4. (Optional) Configure user mappings.

    For details, see section "Managing User Mappings Across Protocols (CIFS-NFS)" in the Basic Storage Service Configuration Guide for File corresponding to your product.

  5. (Optional) Create a quota.

    For details, see section "(Optional) Creating a Quota" in the Basic Storage Service Configuration Guide for File corresponding to your product.

Download
Updated: 2019-07-12

Document ID: EDOC1000138854

Views: 36029

Downloads: 2047

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next