No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Administrator Guide

OceanStor V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, 6800 V3, 18500 V3, and 18800 V3. Routine maintenance activities are the most common activities for the storage device, including powering on or off the storage device, managing users, modifying basic parameters of the storage device, and managing hardware components. This document is intended for the system administrators who are responsible for carrying out routine maintenance activities, monitoring the storage device, and rectifying common device faults.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Obtaining Current System Version Information

Obtaining Current System Version Information

You can use DeviceManager and the CLI to query and familiarize yourself with storage system version information so that you can quickly determine matching software versions based on the system version in maintenance.

Using DeviceManager

You can use DeviceManager to view the current storage system version.

  1. Log in to DeviceManager.

    Go to the DeviceManager management page.

  2. In the navigation tree on the right, click Home.
  3. In Basic Information, view Version. That is, you can view the current storage system version, as shown in Figure 5-44.

    Figure 5-44 Basic storage system information

    You can understand the supported software version based on the obtained storage system version and the Version Mapping when installing or upgrading UltraPath and SmartKit.

Obtaining Current System Version Information Using the CLI

You can use the CLI to query and familiarize yourself with storage system version information so that you can quickly determine matching software versions based on the system version in maintenance.

  1. Log in to the CLI as the super administrator.
  2. Run the show system general command to view the storage system version.

     
    admin:/>show system general 
     
    System Name         : XXX.Storage 
    Health Status       : Normal 
    Running Status      : Normal 
    Total Capacity      : 3.186TB 
    SN                  : XXX 
    Location            : 
    Product Model       : XXX 
    Product Version     : VX00R00XCXX 
    High Water Level(%) : 80 
    Low Water Level(%)  : 20 
    WWN                 : XXX 
    Time                : 2015-07-07/15:34:05 UTC+08:00 
    Patch Version       : SPCXXX

    In the command output, the value of Product Version is the version of the current storage system.

    You can understand the supported software version based on the obtained storage system version and the Version Mapping when installing or upgrading UltraPath and SmartKit.

Download
Updated: 2019-07-12

Document ID: EDOC1000138854

Views: 36577

Downloads: 2055

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next