No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Administrator Guide

OceanStor V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, 6800 V3, 18500 V3, and 18800 V3. Routine maintenance activities are the most common activities for the storage device, including powering on or off the storage device, managing users, modifying basic parameters of the storage device, and managing hardware components. This document is intended for the system administrators who are responsible for carrying out routine maintenance activities, monitoring the storage device, and rectifying common device faults.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Logging In to the eService Client

Logging In to the eService Client

This section explains how to log in to eService Client.

Prerequisites

eService has been installed.

Procedure

  1. Start eService.

    You can start eService using either of the following methods:

    • After eService is installed, start eService immediately and click Finish.
    • On the desktop, double-click the eService icon to start eService.

  2. In the login dialog box that is displayed, select an interface language, fill in Administrator Password, and click Log In.

    NOTE:

    Use the default password to log in to eService. The default administrator password is Admin@123.

  3. (Optional) Change the login password.

    1. Click OK in the dialog box that is displayed upon the first login indicating Please change the default password upon the first login.

      Change Password is displayed.

    2. Enter the old password in Old Password and the new password in New Password and click OK.

      Successfully changed the password is displayed.

      NOTE:
      • The password must contain 8 to 32 characters including case-sensitive letters and special characters. The new password must be different from the default password.
      • The password validity period is six months. Change the password within the specified period.
    3. After the password is changed, the login dialog box is displayed again. In the dialog box that is displayed, select Language, enter the password in Administrator Password, and click Log In.
    NOTE:

    The account is locked after incorrect passwords are entered for five consecutive times. It will be unlocked 5 minutes later.

Follow-up Procedure

For system security, eService will log out automatically if a user that has logged in does not perform any operations for 10 minutes. A window that asks you to log in again is displayed.

You can enter Administrator Password to log in to eService again.

Download
Updated: 2019-07-12

Document ID: EDOC1000138854

Views: 36046

Downloads: 2047

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next