No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Administrator Guide

OceanStor V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, 6800 V3, 18500 V3, and 18800 V3. Routine maintenance activities are the most common activities for the storage device, including powering on or off the storage device, managing users, modifying basic parameters of the storage device, and managing hardware components. This document is intended for the system administrators who are responsible for carrying out routine maintenance activities, monitoring the storage device, and rectifying common device faults.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Logging In to the SmartKit

Logging In to the SmartKit

After logging in to SmartKit, you can deploy, maintain, and upgrade storage devices through configuration. This section describes how to log in to SmartKit.

Context

  • After SmartKit is installed, the background programs in ToolStore keep running and access the technical support website, obtaining upgrading information about SmartKit and tools in it and providing pop-up messages.
  • You must have administrator rights to run some tools. Therefore, you are advised to run SmartKit as an operating system administrator.

Procedure

  1. Run SmartKit on the maintenance terminal.

    NOTE:

    Step 2 and Step 3 are dedicated to SmartKit running on 2000, 5000, and 6000 series storage devices. In scenarios where SmartKit is running on SVP environments of 18000 series storage devices, a message will be displayed prompting you to enter the account and log in.

  2. (Optional) If you use SmartKit for the first time, a usage guide page is displayed introducing major functions of SmartKit.

    1. Click Check the tool operation guide. A page is displayed in your browser listing the corresponding documents related to SmartKit. You can select a document to view.
    2. Click Next. Major functions of ToolStore are displayed on the usage guide page.
    3. Click Next. Major functions of Scenario-based Task are displayed on the usage guide page.
    4. Click Close. The Activating page is displayed.

  3. Activate SmartKit.

    1. In the Please select a location drop-down list, select your location.
    2. Select your identity.
    3. Select whether to activate ToolStore.
      • Select Activating and enter the account and password for logging in to Huawei support website, and then click Activating Store.
      • Select Not activate. If you want to use ToolStore, activate it on the ToolStore page.
      NOTE:

      If you select Not activate, you will log in to SmartKit as a visitor and cannot use ToolStore.

    4. Click OK. The Operation Safety Precautions page is displayed.
    5. Select your location. You can click Download to download the Authorization for Accessing the Customer's Network for Operation and Processing Data.
    6. Read the safety precautions carefully and click Close.

Download
Updated: 2019-07-12

Document ID: EDOC1000138854

Views: 36200

Downloads: 2049

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next