No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Administrator Guide

OceanStor V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, 6800 V3, 18500 V3, and 18800 V3. Routine maintenance activities are the most common activities for the storage device, including powering on or off the storage device, managing users, modifying basic parameters of the storage device, and managing hardware components. This document is intended for the system administrators who are responsible for carrying out routine maintenance activities, monitoring the storage device, and rectifying common device faults.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Logging In to DeviceManager (Using a Tablet)

Logging In to DeviceManager (Using a Tablet)

Mobile devices such as a tablet can access and view a storage device through a virtual wireless network.

Context

  • The default user name and password of the super administrator are admin and Admin@storage respectively.
  • In terms of tablet-based login, you can only use iPad Air (Safari) and HUAWEI MediaPad 10 FHD (Chrome). This section uses iPad as an example to describe how to log in to the management software. The login operations on other mobile devices are similar.
  • By default, DeviceManager allows 32 users to log in concurrently.
  • If a user does not perform any operations after logging in to the system for a period longer than the timeout limit (the limit is 30 minutes by default and modifiable), the system logs out automatically.
  • If an account is not used to log in to the system for a certain period of time (the period is 60 days by default and modifiable), it will be locked and can only be unlocked by the super administrator.

Procedure

  1. Access a Wi-Fi network.

    1. On the desktop of iPad, choose Settings > WLAN.

      The WLAN page is displayed.

    2. In the CHOOSE A NETWORK area, select the desired Wi-Fi network.

      The Enter Password page is displayed.

    3. Set Password to the password of the Wi-Fi network.
    4. Click Join.

      The iPad is connected to the Wi-Fi network.

  2. Log in to the management software.

    1. On the desktop of iPad, click Safari.
    2. Set Address to https://xxx.xxx.xxx.xxx:8088/ismpad/login.html and tap Go. xxx.xxx.xxx.xxx indicates the IP address of the management network port on the SVP.

      The login page of the management software is displayed.

    3. (Optional) In Language, select a language.
    4. Set Username and Password to the user name and password for logging in to the management software.
      NOTE:
      • The default user name and password are admin and Admin@storage respectively.
      • If a verification code is required, enter the correct verification code.
      • You must change the default login password immediately when you are logging in to the storage system for the first time and periodically change your login password in the future. This reduces the password leakage risks. For details about how to change the password, see Changing Password.
      • If you forget the password of an administrator or a read-only user, contact the super administrator to reset the password. If you forget the password of the super administrator (admin by default), contact root administrator _super_admin to log in to the CLI through a serial port and run initpasswd to reset the password. For details, see Resetting the Password of an Administrator or a Read-Only User and Resetting the Password of a Super Administrator.
      • If you enter incorrect passwords for a specified number of times (3 times by default and equal to the value specified in Number of Incorrect Passwords on the Login Policy page), the account is automatically locked for the period of lock time.
        • For V300R006C30 and earlier versions, the lock period is 15 minutes by default.
        • For V300R006C50 and later, the lock period is 5 minutes by default
    5. Click Log In.

      The home page of the management software is displayed.

Download
Updated: 2019-07-12

Document ID: EDOC1000138854

Views: 36556

Downloads: 2054

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next