No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Administrator Guide

OceanStor V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, 6800 V3, 18500 V3, and 18800 V3. Routine maintenance activities are the most common activities for the storage device, including powering on or off the storage device, managing users, modifying basic parameters of the storage device, and managing hardware components. This document is intended for the system administrators who are responsible for carrying out routine maintenance activities, monitoring the storage device, and rectifying common device faults.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Logging In to the Linux VM of the SVP Using VNC

Logging In to the Linux VM of the SVP Using VNC

If management software in the SVP works incorrectly, you can log in to the Linux VM of the SVP using VNC for maintenance. This section describes how to log in to the Linux VM.


The KVM has been configured for the storage system.


  1. Start the KVM.
  2. Log in to the SVP host as user svp_user. The default password is Aguser@12#$.
  3. On the host desktop, choose Applications > System > Terminal > Xterm.
  4. In the command window that is displayed, run vncviewer :0.

    The login page of the Linux operating system built in the SVP is displayed.

  5. Log in to the Linux VM as user root. The default password is VM12@storage.

Follow-up Procedure

After logging in to the Linux VM using VNC, you need only to operate the VM as a Linux operating system. You can manually collect system or software logs and restart malfunctioning processes or replace faulty applications to rectify faults in a timely manner.

Updated: 2019-07-12

Document ID: EDOC1000138854

Views: 36276

Downloads: 2049

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next