No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Basic Storage Service Configuration Guide for File

OceanStor V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, 6800 V3, 18500 V3, and 18800 V3. It describes the basic storage services and explains how to configure and manage them.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Security Policies for a Local Authentication User

Configuring Security Policies for a Local Authentication User

Security policies include the user name, password, and login policies.

Procedure

  1. Log in to DeviceManager.
  2. Choose Provisioning > User Authentication.
  3. Select More > Set Security Policies.

    The Set Security Policies dialog box is displayed.

  4. Select Username Policy tab to configure the local authentication user name policy.

    Table 5-20 describes the related parameter.

    Table 5-20 Username policy

    Parameter

    Description

    Value

    Min.Length

    Minimum length of the user name. This parameter prevents user name being too short.

    [Value range]

    An integer ranging from 1 to 31

    [Default value]

    8

  5. Select Password Policy tab to configure password policy for the local authentication user.

    Table 5-21 describes related parameters.

    Table 5-21 Password policy

    Parameter

    Description

    Value

    Min. Length

    Minimum length of the user password. This parameter prevents password being too short.

    [Value range]

    Its value is an integer ranging from 8 to 32.

    [Default value]

    8

    Max. Length

    Maximum length of the user password. This parameter prevents password being lengthy.

    [Value range]

    Its value is an integer ranging from 8 to 32.

    [Default value]

    16

    Complexity

    Complexity of the user password. This parameter prevents password being too simple. The complexity types include:

    • Must contain special characters and any two types of uppercase letters, lowercase letters and digits
    • Must contain special characters, uppercase letters, lowercase letters and digits

    [Default value]

    Must contain special characters and any two types of uppercase letters, lowercase letters and digits.

    Number of Duplicate Characters

    Maximum number of consecutive duplicate characters.

    [Value range]

    Unlimited or an integer ranging from 1 to 9

    [Default value]

    3

    Password Validity Period (days)

    Setting of the password's validity period. You are advised to enable Password Validity Period (days).

    After Password Validity Period (days) is enabled, you need to set the password validity days. After the validity period of a password expires, the system prompts you to change the password in a timely manner.

    NOTE:

    If this parameter is not selected, the password will never expire. To ensure storage system security, you are advised to select and set this parameter.

    [Value range]

    An integer ranging from 1 to 999

    Password Change Interval (minutes)

    Change interval of a password.

    [Value range]

    An integer ranging from 1 to 9999

    [Default value]

    5

  6. Select Login Policy tab to configure password policy for the local authentication user.

    Table 5-22 describes related parameters.

    Table 5-22 Login policy

    Parameter

    Description

    Value

    Number of Incorrect Passwords

    Times allowed for consecutively entering incorrect passwords. After it has been enabled, within one minute, when incorrect passwords are input exceeds the Number of Incorrect Passwords times, the user account is automatically locked. The user account will be automatically unlocked after being locked for 1 minute.

    [Value range]

    An integer ranging from 1 to 999

    [Default value]

    5

    Idle Period (Days)

    A local authentication user account will be locked if it is not used for login and the idle period exceeds the specified days.

    [Value range]

    An integer ranging from 1 to 999

    [Default value]

    60

  7. Click OK.

    The Success dialog box is displayed.

  8. Click OK to finish configuring security policies.
Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138856

Views: 62165

Downloads: 830

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next