No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Basic Storage Service Configuration Guide for File

OceanStor V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, 6800 V3, 18500 V3, and 18800 V3. It describes the basic storage services and explains how to configure and manage them.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Modifying the Properties of a Local Authentication User

Modifying the Properties of a Local Authentication User

This operation enables you to change the password, modify the primary group and the description of a local authentication user.

Context

The change of the local authentication user or domain user (including the user is disabled or deleted, user password is changed or expires, and the owning group of the user is changed) that access a CIFS/FTP/NFS share takes effect after the user is authenticated again. You can mount the share again to trigger the authentication.

Procedure

  1. Log in to DeviceManager.
  2. Choose Provisioning > User Authentication.
  3. Select the local authentication user whose properties you want to change.
  4. Click Properties.

    The Local Authentication User Properties dialog box is displayed.

  5. Change the password of the local authentication user.

    1. Click Change password.
    2. In New Password, enter a new password.

      The system default password requirements are:

      • Contains 8 to 16 characters.
      • Contains special characters. Special characters include: !"#$%&'()*+,-./:;<=>?@[\]^`{_|}~ and spaces.
      • Contains any two types of the uppercase letters, lowercase letters, and digits.
      • Cannot contain three consecutive same characters.
      • Differs from the user name or the reverse of the user name.

      You can modify password security policy in Set Security Policies.

    3. In Confirm Password, enter the new password again.

  6. Modify the primary group.

    1. Click the Primary Group the local authentication user belongs to.

      The Select Primary Group dialog box is displayed.

    2. In the user group list, select a new user group and click OK.

      The system goes back to Local Authentication User Properties dialog box.

  7. Modify the description of the local authentication user in Description.
  8. Click OK.

    The Success dialog box is displayed.

  9. Click OK to finish modifying the properties of the local authentication user.
Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138856

Views: 61886

Downloads: 828

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next