No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Basic Storage Service Configuration Guide for File

OceanStor V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, 6800 V3, 18500 V3, and 18800 V3. It describes the basic storage services and explains how to configure and manage them.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Modifying the Parameters of an HTTP Share

Modifying the Parameters of an HTTP Share

This operation enables you to modify the parameters of an HTTP share, including the setting the maximum number of connections and enabling or disabling DAV.

Prerequisites

  • You are an administrator or super administrator.
  • An HTTP share directory has been created.

Procedure

  1. Log in to DeviceManager.
  2. Choose Settings > Storage Settings > File Storage Service > HTTP Service.
  3. Modify HTTP service parameters based on the planned data.

    Table 5-39 HTTP service parameters

    Parameter

    Description

    Setting

    HTTP Service

    Global control over the enable and disable status of the HTTP sharing service. If this parameter is set to disable, all the other parameter configurations become invalid.

    NOTE:
    • By default, the storage system provides the HTTPS service certificate. You are advised to replace the certificate with the private certificate before accessing HTTPS shares. After the certificate is replaced, the CA certificate of the storage system must be imported for the browser to eliminate security alarms. As the service IP address is used to access the HTTPS service, alarm This website's address does not match the address in the security certificate cannot be cleared.
    • When the HTTP service is disabled, the system automatically deletes information about shared file systems and directories. When the HTTP service is enabled again, configure the HTTP shared file systems and directories.

    [Example]

    Enable

    Max. Number of Connections

    Maximum number of HTTP share connections allowed by the system.

    NOTE:

    The maximum number of connections varies depending on the device model. For details, see the Software Specifications of the corresponding model and version in the product description.

    [Value range]

    1 to 256

    HTTP Default Port

    Only the HTTPS port is enabled for the storage system when the HTTP service is enabled. To enable the HTTP port, select Enable.

    NOTE:

    Exercise caution when enabling the HTTP port.

    [Example]

    Enable

    File System

    File system that you want to share over HTTP.

    FileSystem001

    Directory

    Directory that you want to share over HTTP.

    Test

    Share Path

    Path that you want to share over HTTP. This parameter consists of File System and Directory.

    [Example]

    /FileSystem001/Test

    DAV

    DAV, also known as WebDAV (Web-based Distributed Authoring and Versioning), is a communication protocol based on HTTP. Once WebDAV enabled, the system allows the DAV client to read/write the shared directory, and supports file locking, file unlocking, and file version control.

    [Example]

    Enable

  4. Click Save.
Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138856

Views: 65095

Downloads: 849

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next