No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Basic Storage Service Configuration Guide for File

OceanStor V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, 6800 V3, 18500 V3, and 18800 V3. It describes the basic storage services and explains how to configure and manage them.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Modifying a User Mapping

Modifying a User Mapping

This operation enables you to modify the mapping type, source user, target user, mapping priority of a mapping. The modified mapping can be used to access shares.


  1. Log in to DeviceManager.
  2. Choose Provisioning > User Authentication > User Mapping.
  3. Select a user mapping that you want to modify and click Properties.
  4. Modify the parameters of the user mapping by referring to Table 5-41.

    Table 5-41 User mapping parameters

    Parameter Name



    Mapping Type

    A user mapping type related to the operating system, including:

    • Windows to Unix: When accessing UNIX shares using Windows, a Windows user has all the permissions granted to the target user.
    • Unix to Windows: When accessing Windows shares using UNIX, a UNIX user has all the permissions granted to the target user.


    Windows to Unix

    Source User

    The source user in a mapping.



    Target User

    The target user in a mapping.


    Click Test to check whether the target user exists.




    When multiple mappings share the same source user, the system uses the mapping with the highest priority.


    A smaller number indicates a higher priority.



  5. Click OK.
  6. Click Close.
Updated: 2019-07-12

Document ID: EDOC1000138856

Views: 62217

Downloads: 830

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next