No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Basic Storage Service Configuration Guide for File

OceanStor V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, 6800 V3, 18500 V3, and 18800 V3. It describes the basic storage services and explains how to configure and manage them.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Modifying the Secondary Group of a Local Authentication User

Modifying the Secondary Group of a Local Authentication User

This operation enables you to modify the secondary group of a local authentication user.


The change of the local authentication user or domain user (including the user is disabled or deleted, user password is changed or expires, and the owning group of the user is changed) that access a CIFS/FTP/NFS share takes effect after the user is authenticated again. You can mount the share again to trigger the authentication.


  1. Log in to DeviceManager.
  2. Choose Provisioning > User Authentication.
  3. Select the local authentication user whose secondary group you want to change.
  4. Click More > Change Secondary Group.

    The Change Secondary Group dialog box is displayed.

  5. Change the secondary group of a local user.

    1. To add a new user group, click Add.

      The Select User Group dialog box is displayed.

    2. Select one user group or multiple user groups that you want to add and click OK.

      To remove a user group, select it and click Remove.

    3. Click OK.

      The Success dialog box is displayed, indicating that the operation succeeded.

    4. Click OK to finish modifying the secondary group of a local authentication user.

Updated: 2019-07-12

Document ID: EDOC1000138856

Views: 62451

Downloads: 830

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next