No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Basic Storage Service Configuration Guide for File

OceanStor V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, 6800 V3, 18500 V3, and 18800 V3. It describes the basic storage services and explains how to configure and manage them.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Creating Storage Resources Based on Applications

Creating Storage Resources Based on Applications

For 2000, 5000 and 6000 series storage systems, you can configure storage resources for VMware and to enable application servers to use allocated storage resources.

Prerequisites

The system has sufficient storage space.

Procedure

  1. Log in to DeviceManager.
  2. Choose Provisioning > Application > VMware.
  3. Select File System in Resource Type.
  4. Click Create.

    The Create VMware Storage Resource Wizard is displayed.

  5. Set basic information about the VMware instance to be created.

    Table 4-1 describes the related parameters.

    Table 4-1 Parameters of a VMware instance

    Parameter

    Description

    Value

    Name

    Name of a VMware instance.

    The name:

    • Must be unique.
    • Can contain only letters, digits, and underscores (_).
    • Must contain 1 to 22 characters.

    [Example]

    VMwareApp_001

    Description

    Description of a VMware instance. Description can be left blank or contain up to 255 characters.

    [Example]

    -

  6. Click Next and select a virtualization type.

    Table 4-2 describes the related parameters.

    Table 4-2 VMware application parameters

    Parameter

    Description

    Value

    Virtual desktop

    Allows enterprise-level applications to dynamically access desktop systems remotely and implements central hosting of data centers.

    [Example]

    Virtual desktop

    Virtual server

    Reduces consumption of manpower and material resources and simplifies work for small- and mid-size enterprises and enterprises that construct websites for the first time.

    [Example]

    Virtual server

  7. Set the related parameters based on the selected virtualization type.

    • If Virtual desktop is selected, set virtual desktop parameters, as shown in Table 4-3.

      Table 4-3 Virtual desktop parameters

      Parameter

      Description

      Value

      Virtual Desktop Level

      Level of the virtual desktop constructed by VMware. The value of this parameter affects the values of Space per Desktop (GB), Memory per Desktop (GB), and Load per Desktop (IOPS).

      [Value range]

      The value can be Small, Medium, Large and Extra-Large.

      [Example]

      Medium

      Space per Desktop (GB)

      Maximum storage space allocated by VMware to each virtual desktop. The value of this parameter is subject to Virtual Desktop Level and is user-definable.

      [Example]

      160

      Memory per Desktop (GB)

      Maximum memory capacity allocated by VMware to each virtual desktop. The value of this parameter is subject to Virtual Desktop Level and is user-definable.

      [Example]

      4

      Load per Desktop (IOPS)

      Maximum IOPS of each virtual desktop. The value of this parameter is subject to Virtual Desktop Level and is user-definable.

      [Example]

      16

      Desktop Quantity

      Number of virtual desktops constructed by VMware.

      [Example]

      10

    • If Virtual server is selected, set virtual server parameters, as shown in Table 4-4.

      Table 4-4 Virtual server parameters

      Parameter

      Description

      Value

      Database server

      Type of a VMware virtual server.

      [Example]

      -

      Mailbox server

      Type of a VMware virtual server.

      [Example]

      -

      Application server

      Type of a VMware virtual server.

      [Example]

      -

      Quantity

      Number of virtual servers constructed by VMware.

      [Value range]

      The number of servers is subject to Average Load (IOPS), Average Capacity (GB), and type.

      [Example]

      2

      Virtual Server Level

      Level of a virtual server constructed by VMware. The value of this parameter affects the values of Average Load (IOPS) and Average Capacity (GB).

      [Value range]

      The value can be Extra-Small, Small, Medium, Large and Extra-Large.

      [Example]

      Medium

      Average Load (IOPS)

      IOPS of a virtual server. The value of this parameter is subject to Virtual Server Level and is user-definable.

      [Example]

      25

      Average Capacity (GB)

      Storage capacity allocated to virtual servers. The value of this parameter is subject to Virtual Server Level and is user-definable.

      [Example]

      25

  8. Optional: Set advanced properties for VMware applications.

    1. Click Advanced.

      The Advanced dialog box is displayed.

    2. Set advanced properties for VMware applications.

      Table 4-5 describes related parameters.

      Table 4-5 Parameters in advanced properties of a VMware application

      Parameter

      Description

      Value

      Enable SmartThin

      If thin provisioning is enabled, the storage system dynamically allocates storage capacity to file systems based on the actual capacity used by hosts instead of allocating a preset capacity, achieving on-demand allocation.

      [Example]

      Enable SmartThin

      Reserve snapshot space

      After this option is selected, the system automatically selects a storage pool whose capacity is 130% of the required capacity. When you use the storage pool to create storage resources for applications, reserve sufficient space to create snapshots for applications.

      [Example]

      -

    3. Click OK.

      You are returned to the Set Virtual Desktop Parameters or Set Virtual Server Parameters page.

  9. Click Next and set parameters for VMware storage resources.

    The system will allocate optimal storage resources based on preset VMware parameters.
    Table 4-6 VMware storage resource parameters

    Parameter

    Description

    Value

    Capacity

    Storage space allocated to store system data or service data.

    [Example]

    640 GB

    Quantity

    Number of file systems allocated to store system data or service data.

    [Example]

    1

    Storage Pool Policy

    The system sets storage pool allocation policies based on preset VMware parameters. The performance level of each VM is defined by High performance, Performance/Cost balance, Low cost, or Manual selection, described as follows:

    • High performance: The system automatically selects a RAID 6 storage pool containing SAS disks only. If such a storage pool does not exist in the system, create one.
    • Performance/Cost balance: The system automatically selects a RAID 6 storage pool containing SAS and NL-SAS disks only. If such a storage pool does not exist in the system, create one.
    • Low cost: The system automatically selects a RAID 6 storage pool containing NL-SAS disks only. If such a storage pool does not exist in the system, create one.
    • Manual selection: Users define storage pools that meet the VMware service requirements.

    [Example]

    Performance/Cost balance

    Selected Storage Pool

    Name of the storage pool automatically allocated by the system to a VMware instance.

    [Example]

    StoragePool001

  10. Optional: If no desired storage pools are available, click and modify Storage Pool Policy in the displayed dialog box, or click Create Storage Pool to create one.
  11. Optional: Set permissions for NFS shares.

    1. Select a client that you want to set NFS shares in Client Information.

      Click Add to create a client if there is no one in the client list.

    2. Click Next.

  12. Confirm your settings.

    1. Click Next.

      The Summary page is displayed.

    2. Verify that the information about the VMware instance to be created is correct and click Finish.

      The Execution Result dialog box is displayed, indicating that the operation succeeded.

    3. Click Close.

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138856

Views: 62569

Downloads: 831

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next