No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Basic Storage Service Configuration Guide for File

OceanStor V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, 6800 V3, 18500 V3, and 18800 V3. It describes the basic storage services and explains how to configure and manage them.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling the HTTP Service

Enabling the HTTP Service

This operation enables you to enable the HTTP service.

Prerequisites

A file system whose HTTP service must be enabled has been created.

Procedure

  1. Log in to DeviceManager.
  2. Choose Settings > Storage Settings > File Storage Service > HTTP Service.
  3. In HTTP Service, select Enable.
  4. In Max. Number of Connections, enter the number of connections that the HTTP share supports.

    NOTE:

    The maximum number of connections varies depending on the device model. For details, see the Software Specifications of the corresponding model and version in the product description.

  5. Optional: In HTTP Default Port, select Enable.

    Exercise caution when enabling the HTTP port.

  6. In File System, select the file system whose HTTP service you want to enable.
  7. Optional: In Directory, enter an accessible directory under the file system selected that you want to share over HTTP.

    NOTE:

    Share Path contains File System and Directory.

  8. Optional: In DAV, select Enable.

    NOTE:
    • DAV, also known as WebDAV (Web-based Distributed Authoring and Versioning), is a communication protocol based on HTTP. Once WebDAV enabled, the system allows the DAV client to read/write the shared directory, and supports file locking, file unlocking, and file version control.
    • After enabling WebDAV, resource users may have full control permissions of the HTTP sharing root directories.

  9. Click Save.

    The Success dialog box is displayed.

  10. Click OK.
Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138856

Views: 62128

Downloads: 830

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next