No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Basic Storage Service Configuration Guide for File

OceanStor V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, 6800 V3, 18500 V3, and 18800 V3. It describes the basic storage services and explains how to configure and manage them.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Modifying the Hot Spare Policy of a Disk Domain

Modifying the Hot Spare Policy of a Disk Domain

This operation enables you to modify the hot spare policy of a disk domain.

Context

For 18000 series storage systems, the high hot spare policy is used by default. You are not allowed to modify the hot spare policy on DeviceManager. To modify the hot spare policy, run the change disk_domain general command in the CLI.

Precautions

Note the following if you want to modify the hot spare policy of a disk domain:

  • To change the hot spare policy from None to Low or from Low to High, ensure that the disk domain's remaining capacity is not smaller than 10% of its total capacity.
  • To change the hot spare policy from None to High, ensure that the disk domain's remaining capacity is not smaller than 20% of its total capacity.

A hot spare policy cannot be modified if the disk domain's remaining capacity does not meet the previously described requirements. To modify the hot spare policy successfully, expand the disk domain.

Procedure

  1. Log in to DeviceManager.
  2. Choose Provisioning > Disk Domain.
  3. Modify the properties of a disk domain.

    1. Select the disk domain you want to modify and click Properties.

      The Properties of Disk Domain dialog box is displayed.

    2. Click the Hot Spare Policy tab page.
    3. Modify the hot spare policy in the disk domain and click OK.

      The Warning dialog box is displayed.

      NOTE:

      The Warning dialog box is displayed only when the level of a hot spare policy is modified from high to low.

  4. Optional: Confirm the information in the dialog box, select I have read and understand the consequences associated with performing this operation, and click OK.

    The Execution Result dialog box is displayed, indicating that the operation succeeded.

  5. Click Close.
Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138856

Views: 62027

Downloads: 830

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next