No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Basic Storage Service Configuration Guide for File

OceanStor V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, 6800 V3, 18500 V3, and 18800 V3. It describes the basic storage services and explains how to configure and manage them.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Viewing a Bond Port

Viewing a Bond Port

This section describes how to view the ID, name, MTU, and the number of ports bonded to the bond port.


A bond port has been created.


  1. Log in to DeviceManager.
  2. Choose Provisioning > Port > Bond Ports.
  3. View bond port information. The parameters are described in Table 5-11.

    Table 5-11 Bond port parameters




    ID of the bond port.


    Name of the bond port.

    Health status

    Health status of the bond port.

    Running status

    Running status of the bond port.


    MTU of the bond port.

    Number of ports

    Number of Ethernet ports bonded into the bond port.

Updated: 2019-07-12

Document ID: EDOC1000138856

Views: 62460

Downloads: 830

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next