No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Basic Storage Service Configuration Guide for File

OceanStor V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, 6800 V3, 18500 V3, and 18800 V3. It describes the basic storage services and explains how to configure and manage them.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Modifying Permissions for Accessing a CIFS Homedir Share

Modifying Permissions for Accessing a CIFS Homedir Share

This section describes how to modify the permissions of a local authentication user or user group, domain user or user group for accessing CIFS Homedir shared resources to meet service requirements.

Procedure

  1. Log in to DeviceManager.
  2. Choose Provisioning > Share > CIFS Homedir.
  3. In the CIFS Homedir share list, select the CIFS Homedir share whose user or user group you want to modify.
  4. Add user or user group for accessing the CIFS Homedir share.

    1. In Users/User Groups area, click Add.

      The Add User/User Group dialog box is displayed.

    2. In User/User Group, select the user type or user group type.

      The values include: Everyone, Local authentication user, Local authentication user group, Domain user, and Domain user group.

    3. If you select Everyone, click Add.

      The system adds Everyone to the list.

      NOTE:

      Everyone means every user has the access permission.

    4. If you select Local authentication user or Local authentication user group, click Find in the pop-up Add User or Add User Group dialog box to select the user or user group you want to add. Click OK.
    5. If you select Domain user or Domain user group, enter the corresponding name in Name, and click Add.
      NOTE:

      The name format is Domain name\Domain user name or Domain name\Domain user group name.

    6. In Permission Level, select the CIFS Homedir access permission for the user or user group added.

      The CIFS Homedir access permission levels include:

      • Full control: has all rights for the CIFS Homedir share.
      • Read-only (default value): only has read rights for the CIFS Homedir share.
      • Read and write: has read and write right for the CIFS Homedir share.
      • Forbidden: access forbidden.
    7. Click OK.

      The Execution Result dialog box is displayed.

    8. Click Close.

  5. Modify the permission of a user or user group.

    1. In Users/User Groups, select the user or user group whose permission you want to modify and click Properties.

      The User/User Group Properties dialog box is displayed.

    2. Select a new permission for the user or user group.

      A user's possible permissions to access a CIFS share include:

      • Full control: The user has full permission for the CIFS share.
      • Read-only: The user can only read the CIFS share.
      • Read and write: The user can read and write the CIFS share.
      • Forbidden: The user is forbidden to access the CIFS share.
    3. Click OK.

      The Execution Result dialog box is displayed.

    4. Click Close to finish modifying the permission for accessing a CIFS share.

  6. Remove a user or user group.

    1. In Users/User Groups, select the user or user group you want to remove and click Remove.

      The security alert dialog box is displayed.

    2. Confirm the information in the dialog box and select I have read and understand the consequences associated with performing this operation. Then click OK.

      The Execution Result dialog box is displayed.

    3. Click Close to finish removing the user or user group.

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138856

Views: 62395

Downloads: 830

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next