About This Document
Purpose
This document describes HyperClone for block, a LUN clone feature developed by Huawei, including its working principles, application scenarios, configuration, and management.
The following table lists the product models supporting HyperClone for block.
Product Series |
Product Model |
Product Version |
|---|---|---|
OceanStor 2000 V3 series |
OceanStor 2200 V3 |
V300R006C00/C10/C20/C30/C50/C60 |
OceanStor 2600 V3 |
V300R006C00/C10/C20/C30/C50/C60/C61 |
|
OceanStor 5000 V3 series |
OceanStor 5300 V3, 5500 V3, 5600 V3, and 5800 V3 |
V300R006C00/C10/C20/C30/C50/C60 |
OceanStor 6000 V3 series |
OceanStor 6800 V3 |
V300R006C00/C10/C20/C30/C50/C60 |
OceanStor 18000 V3 series |
OceanStor 18500 V3 and 18800 V3 |
V300R006C00/C10/C20/C30/C50/C60 |
Intended Audience
This document is intended for:
- Technical support engineers
- Maintenance engineers
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Symbol |
Description |
|---|---|
Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. |
|
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. |
|
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. |
|
Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results. NOTICE is used to address practices not related to personal injury. |
|
Calls attention to important information, best practices and tips. NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration. |
Change History
Changes between document issues are cumulative. The latest document issue contains all the changes made in earlier issues.
Issue 10 (2020-04-10)
This issue is the tenth official release, which incorporates the following changes:
Optimized some description.
Issue 09 (2019-06-30)
This issue is the ninth official release, which incorporates the following changes:
Optimized some description.
Issue 08 (2019-01-15)
This issue is the eighth official release, which incorporates the following changes:
Optimized some description.
Issue 07 (2018-12-06)
This issue is the seventh official release, which incorporates the following changes:
Optimized some description.
Issue 06 (2018-07-30)
This issue is the sixth official release, which incorporates the following changes:
Optimized some description.
Issue 05 (2018-05-09)
This issue is the fifth official release, which incorporates the following changes:
Optimized some description.
Issue 04 (2018-01-30)
This issue is the fourth official release, which incorporates the following changes:
Optimized descriptions about section "Impact and Restrictions".
Issue 03 (2017-11-30)
This issue is the third official release, which incorporates the following changes:
Optimized some description.
Issue 02 (2017-08-30)
This issue is the second official release, which incorporates the following changes:
Optimized some description.
Issue 01 (2017-06-01)
This issue is the first official release.
Previous
