No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


HyperMirror Feature Guide

OceanStor V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, 6800 V3, 18500 V3, and 18800 V3. This document describes the implementation principles and application scenarios of the HyperMirror feature. Also, it explains how to configure and manage HyperMirror.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Configuration

Verifying the Configuration

After a volume mirror is created, you can remove the mirror copy to judge whether the volume mirror can ensure continuous host services when the mirror copy is faulty.


  • The connection between the storage system and the application server is normal.
  • At least one volume mirror has been created in the storage system, and the Health Status is Normal and the Running Status is Normal.


  1. Map the mirror LUN to the application server.

    1. Log in to DeviceManager. Choose Provisioning > LUN > LUN Group. Click Create to create a LUN group and add the mirror LUN to the LUN group.
    2. Choose Provisioning > Mapping View. Choose the mapping view that the host group which holds the application server belongs to. Then add the newly created LUN group to this mapping view.

  2. Log in to the application server and write X.txt to the mirror LUN.
  3. Log in to DeviceManager. Choose Data Protection > HyperMirror.
  4. Select the mirror LUN and then the mirror copy that you want to delete and click Delete to delete the mirror copy.

    After the mirror copy is deleted, the Health Status of the mirror LUN is Degraded.

  5. Check whether host services are interrupted.

    • If yes, the volume mirror configuration is incorrect. Check DeviceManager to find out whether there is any volume mirror–related alarm. If yes, clear the alarm, create a volume mirror again, and repeat the preceding verification steps. If no, contact technical support engineers.
    • If no, the volume mirror is correctly configured and can be used normally.

Updated: 2019-07-12

Document ID: EDOC1000138859

Views: 14513

Downloads: 247

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next