No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

HyperVault Feature Guide

OceanStor V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, 6800 V3, 18500 V3, and 18800 V3. It describes the implementation principles and application scenarios of the HyperVault feature, and explains how to configure and manage HyperVault.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Managing HyperVault Policies

Managing HyperVault Policies

In the non-tenant scenario, manage HyperVault policies to provide flexible data protection.

Creating a Backup Policy

This operation allows you to configure a local or remote scheduled backup policy.

Prerequisites

The storage system is running properly, and a HyperVault pair has been created.

Context

A HyperVault pair supports a maximum of four local and four remote scheduled backup policies.

Procedure
  1. Log in to DeviceManager.
  2. Choose Data Protection > HyperVault > HyperVault.
  3. Select the HyperVault backup instance to which you want to add a backup policy and click the Copy Policy tab in the lower pane.
  4. Click Create.

    The Create Backup Policy dialog box is displayed.

  5. Configure the backup policy. Table 4-5 describes the parameters.

    Table 4-5 Parameters of a backup policy

    Parameter

    Description

    Value

    Policy Type

    Type of a backup policy

    [Value range]

    Possible values are Local policy and Remote policy.

    [Example]

    Local policy

    Name

    Name of a backup policy

    [Value range]

    • Must be unique.
    • Contains only letters, digits, underscores (_), periods (.), and hyphens (-).
    • Contains 1 to 127 characters.

    [Example]

    localPolicy001

    Backup Copy Threshold

    Maximum number of copies retained. If the number is exceeded, the earliest copy will be deleted automatically.

    [Value range]

    Possible values are 3 to 256.

    [Example]

    3

    Backup Period

    Execution period of a backup policy

    [Value range]

    Possible values are as follows: By Day, Every Week, or Every Month.

    [Example]

    By Day

    Backup Time

    Execution time of a backup policy

    [Value range]

    The minimum backup interval is five minutes. In addition, you can specify a point in time for data backup.

    [Example]

    Executed at 00:00.

  6. Click OK.

    The Success dialog box is displayed, indicating that the operation succeeded.

  7. Click OK.

Modifying a Backup Policy

This operation allows you to modify a backup policy based on the service requirements.

Prerequisites

A HyperVault pair has been created and at least one backup policy has been configured.

Procedure
  1. Log in to DeviceManager.
  2. Choose Data Protection > HyperVault > HyperVault.
  3. Select the HyperVault pair and click the Copy Policy tab.
  4. Select the backup policy that you want to modify and click Properties.

    The Properties dialog box is displayed.

  5. Change the parameter values of the backup policy and click OK.

    The Execution Result dialog box is displayed.

  6. Click Close.

Disabling a Backup Policy

You can disable a backup policy if it is not needed currently.

Prerequisites

A HyperVault pair has been created and at least one backup policy has been configured.

Procedure
  1. Log in to DeviceManager.
  2. Choose Data Protection > HyperVault > HyperVault.
  3. Select the HyperVault pair and click the Copy Policy tab.
  4. Select the backup policy that you want to disable and click Disable.

    The security alert dialog box is displayed.

  5. After you confirm the information, click OK.

    The Success dialog box is displayed, indicating that the operation succeeded.

  6. Click OK.

Enabling a Backup Policy

This operation allows you to activate a backup policy that has been disabled.

Prerequisites

A HyperVault pair has been created and at least one backup policy has been configured.

Procedure
  1. Log in to DeviceManager.
  2. Choose Data Protection > HyperVault > HyperVault.
  3. Select the HyperVault pair and click the Copy Policy tab.
  4. Select the backup policy that you want to enable and click Enable.

    The security alert dialog box is displayed.

  5. After you confirm the information, click OK.

    The Success dialog box is displayed, indicating that the operation succeeded.

    Click OK.

Deleting a Backup Policy

This operation allows you to delete a backup policy that is no longer needed.

Prerequisites

A HyperVault pair has been created and at least one backup policy has been configured for the pair.

Procedure
  1. Log in to DeviceManager.
  2. Choose Data Protection > HyperVault > HyperVault.
  3. Select the HyperVault pair and click the Copy Policy tab.
  4. Select the backup policy that you want to delete and click Delete.

    The security alert dialog box is displayed.

  5. Confirm the information in the dialog box and select I have read and understand the consequences associated with performing this operation.

    The Execution Result dialog box is displayed.

    Click Close.

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138860

Views: 20359

Downloads: 270

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next