Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
10 Gbit/s FCoE Interface Module (Four Ports)
Function
A 10 Gbit/s FCoE interface module provides four 10 Gbit/s FCoE ports.
Ports
Figure 4-64 shows the appearance of a 10 Gbit/s FCoE interface module.
- A 10 Gbit/s four-port FCoE interface module only supports networking through FCoE switches.
- You are not advised to run iSCSI and FCoE protocols simultaneously for a 10 Gbit/s four-port FCoE interface module.
1 |
Power indicator/Hot Swap button on the module |
2 |
10 Gbit/s FCoE port |
3 |
Link/Speed indicator of a 10 Gbit/s FCoE port |
4 |
Module handle |
Indicators
Table 4-27 describes the indicators on a 10 Gbit/s FCoE interface module of a storage system that is powered on.
Table 4-27 Indicators on a 10 Gbit/s FCoE interface module
No. |
Indicators |
Status and Description |
|---|---|---|
1 |
Power indicator/Hot Swap button on the module |
|
3 |
Link/Speed indicator of a 10 Gbit/s FCoE port |
|
