Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Vibration and Shock
Vibration and shock requirements must be met so that storage systems can correctly work or be properly preserved.
Table 7-2 lists the vibration and shock requirements of storage systems.
Table 7-2 Vibration and shock requirements of storage systems
Parameter |
Requirement |
|---|---|
Operating vibration |
5 to 300 Hz: 1.5 m/s2, 0.5 oct/min, 3 axes, 1 sweep cycle per axis, 5 to 500 Hz, 0.27 Grms, 3 axes, 10 min per axis |
Non-operating vibration |
5 to 20 Hz, PSD: 1.0 m2/s3; 20 to 200 Hz, -3 dB/oct; 3 axes, 30 min per axis |
Non-operating shock |
Half sine, 6 ms, 300 m/s2, 6 directions, 3 times per direction |
Previous
