Indicator Introduction

OceanStor 5000 and 6000 V3 Series V300R006 Product Description

Rate and give feedback:

Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).

After a disk enclosure is powered on, you can check the current operating status of the disk enclosure by viewing its indicators.

Indicators on the Front Panel

Figure 4-78 shows the indicators on the front panel of a disk enclosure.

Figure 4-78 Indicators on the front panel of a disk enclosure

1	Running indicator of the disk module	2	Alarm/Location indicator of the disk module
3	Location indicator of the disk enclosure	4	Alarm indicator of the disk enclosure
5	Power indicator of the disk enclosure	-	-

Table 4-34 describes the indicators on the front panel of the disk enclosure.

Table 4-34 Description of the indicators on the front panel of a disk enclosure

Module	No.	Indicator	Status and Description
Disk module	1	Running indicator of the disk module	Steady green: The disk module is working correctly. Blinking green: Data is being read and written on the disk module. Off: The disk module is powered off or powered on incorrectly.
Disk module	2	Alarm/Location indicator of the disk module	Steady red: The disk module is faulty. Blinking red: The disk module is being located. Off: The disk module is working correctly or hot swappable.
System subrack	3	Location indicator of the disk enclosure	Blinking blue: The disk enclosure is being located. Off: The disk enclosure is not located.
	4	Alarm indicator of the disk enclosure	Steady red: An alarm is generated in the disk enclosure. Off: The disk enclosure is working correctly.
	5	Power indicator of the disk enclosure	Steady green: The disk enclosure is powered on. Off: The disk enclosure is powered off.

Indicators on the Rear Panel

Figure 4-79 shows the indicators on the rear panel of a disk enclosure.

Figure 4-79 Indicators on the rear panel of a disk enclosure

1	Alarm indicator of the expansion module	2	Power indicator of the expansion module
3	Indicator of the mini SAS HD expansion port	4	Running/Alarm indicator of the power/fan module

Table 4-35 describes the indicators on the rear panel of the disk enclosure.

Table 4-35 Description of the indicators on the rear panel of a disk enclosure

Module	No.	Indicator	Status and Description
Expansion module	1	Alarm indicator of the expansion module	Steady red: An alarm is generated on the expansion module. Off: The expansion module is working correctly.
	2	Power indicator of the expansion module	Steady green: The expansion module is powered on. Off: The expansion module is powered off.
	3	Indicator of the mini SAS HD expansion port	Steady blue: The port transmission rate is 4 x 12 Gbit/s. Steady green: The port transmission rate is 4 x 3 Gbit/s or 4 x 6 Gbit/s. Steady red: The port is faulty. Off: The link to the port is down.
Power module	4	Running/Alarm indicator of the power/fan module	Steady green: The power module and fan module are normal. Blinking green: The power input is normal but the device is powered off. Steady red: The power module or fan module is faulty. Off: No external power input is found.

Indicators on the Front Panel
Indicators on the Rear Panel

Translation

日本語 Русский 简体中文

Download

Updated: 2021-04-14

Document ID: EDOC1000138866

Downloads: 1607

Average rating:

This Document Applies to these Products

Related Version

Digital Signature File

Digital Signature Authentication Mode

Indicators on the Front Panel

Indicators on the Rear Panel

Related Version

Related Documents

Digital Signature File