No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

SmartPartition Feature Guide

OceanStor V3 Series V300R006

This document is applicable to OceanStor 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, 6800 V3, 18500 V3, and 18800 V3. This document describes the implementation principles and application scenarios of the SmartPartition feature. Also, it explains how to configure and manage SmartPartition.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Modifying the Target Properties of a SmartPartition

Modifying the Target Properties of a SmartPartition

This operation enables you to adjust the read and write partition sizes to suit your service needs.

Procedure

  1. Log in to DeviceManager.
  2. Choose Provisioning > Resource Performance Tuning > SmartPartition.
  3. Select the SmartPartition you want to modify and click Properties.

    The SmartPartition Properties page is displayed.

  4. Change the Read Partition Size and Write Partition Size of the SmartPartition.

    1. Click the Objective tab.
    2. Change the Read Partition Size and Write Partition Size to suit your service needs.

      Table 3-2 describes related parameters.

      Table 3-2 SmartPartition control parameters

      Parameter

      Description

      Value

      Read Partition Size

      Read partition size of the SmartPartition.

      [Value range]

      • The value cannot exceed the available read partition. Optional units are MB and GB.
      • The value of a read partition must be at least 256 MB and an integral multiple of 128 MB. When the entered value is not an integral multiple, the system automatically changes the value to one that meets requirements.

      [Example]

      384 MB

      Write Partition Size

      Write partition size of the SmartPartition.

      [Value range]

      • The value cannot exceed the available write partition. Optional units are MB and GB.
      • The value of a write partition must be at least 256 MB and an integral multiple of 128 MB. When the entered value is not an integral multiple, the system automatically changes the value to one that meets requirements.

      [Example]

      384 MB

    3. Click OK.

      The Caution message box is displayed.

    4. Click OK.

      The Execution Result message box is displayed, indicating that the operation succeeded.

    5. Click Close.

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138875

Views: 9400

Downloads: 167

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next