Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring an SSL VPN Connection
Configuring SSL VPN
- Enter 1 to create a connection.
- Enter 1 to set the VPN type to SSL VPN.
- Enter the corresponding sequence number to complete the configuration of parameters 1 to 5.
- 1. Connection Name(Required)
- 2. Description
- 3. Gateway Address
- 4. Port(Required)
- 5. Tunnel Mode(Required): The options are Reliable Transmission, Quick Transmission, and Auto-sensing.
- Enter 6 to save the configuration.
Establishing an SSL VPN Connection
- Enter the corresponding number to establish an SSL VPN connection.
- Enter 1 to set up an SSL VPN connection.
- A message is displayed, indicating that the connection is set up successfully. Enter the user name and password to log in.
- In the Linux system, the SSL VPN connection configured and established using commands supports only user name/password authentication.
- After the connection is successful, do not close the terminal window. Otherwise, the connection will be disconnected.
SSL VPN Disconnection
Enter q to cut off the connection.
