No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Event Reference

OceanStor Dorado V3 Series V300R001

This document is applicable to OceanStor Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. This document describes the basic knowledge about the events of storage system in terms of event definition, event level, impact on the system, possible cause, and handling procedure. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
0x100F010C0031 Initiator IP Address Is Changed

0x100F010C0031 Initiator IP Address Is Changed


The IP address of an initiator is changed.

Applicable Model

Applicable to all models.



Event Level

Automatically Cleared




Impact on the System


Possible Causes

  • The host corresponding to the initiator is connected to the storage system through different IP addresses.
  • The initiator is used by different hosts to connect to the storage system.


  1. Check whether the two different IP addresses are used by the same host.

    1. If yes, ignore this alarm.
    2. If no=> Step2.

  2. Check whether the same initiator ID is used by two hosts to connect to the storage system.

    1. If yes, change the initiator ID of either host and ensure that the two initiator IDs are different.If initiators of the two hosts have the same ID and deliver data, there is the data inconsistency risk.
    2. If no=> Step3.

  3. Collect related information and contact technical support engineers.
Updated: 2018-10-19

Document ID: EDOC1000141827

Views: 85033

Downloads: 168

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next