No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Event Reference

OceanStor Dorado V3 Series V300R001

This document is applicable to OceanStor Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. This document describes the basic knowledge about the events of storage system in terms of event definition, event level, impact on the system, possible cause, and handling procedure. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
0x100F0CF0032 Controller Power Failure

0x100F0CF0032 Controller Power Failure


A controller is being powered off and the system is about to stop working.

Applicable Model

Applicable to all models.



Event Level

Automatically Cleared




Impact on the System

The controller is being powered off and the system is about to stop working.

Possible Causes

  • Power cables are incorrectly connected.
  • Power cables loosen up or are damaged.
  • No power is input.
  • Power supplies are faulty.
  • The enclosure temperature is high.
  • The controller temperature is high.


  1. Check whether power cables are correctly connected.

    1. If yes=> Step2.
    2. If no, connect the power cables correctly. If the alarm persists=> Step2.

  2. Check power cables.

    1. If any power cable is removed, reinsert it. If the alarm persists=> 2.2.
    2. Replace the power cable. If the alarm persists=> Step3.

  3. Check whether external power is input correctly.

    1. If yes=> Step4
    2. If no, supply power to the storage system correctly. If the alarm persists=> Step4.

  4. Check whether any alarm is generated indicating the power module fault.

    1. If yes, replace the faulty power module. If the alarm persists=> Step5.
    2. If no=> Step5.

  5. Check whether any alarm is generated indicating the controller fault or high enclosure temperature.

    1. If yes, handle the alarm by taking recommended actions. If the alarm persists=> Step6.
    2. If no=> Step6.

  6. Collect related information and contact technical support engineers.
Updated: 2018-10-19

Document ID: EDOC1000141827

Views: 84316

Downloads: 168

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next