No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Event Reference

OceanStor Dorado V3 Series V300R001

This document is applicable to OceanStor Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. This document describes the basic knowledge about the events of storage system in terms of event definition, event level, impact on the system, possible cause, and handling procedure. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
0x200F0337000C Server Link Is Down

0x200F0337000C Server Link Is Down


A server link is down.

Applicable Model

Applicable to all models.



Event Level

Automatically Cleared




Impact on the System

The storage array cannot communicate with the server.

Possible Causes

  • The server is incorrectly configured or does not exist.
  • The key management server certificate does not exist or has expired.
  • The network between the storage array and server is unreachable.
  • The server is faulty.


  1. Check whether the server is correctly configured.

    1. If no, configure the server correctly and wait one minute. If the alarm persists=> Step2.
    2. If yes=> Step2.

  2. Check whether the key management server certificate is valid.

    1. If no, import a valid certificate and wait one minute. If the alarm persists=> Step3.
    2. If yes=> Step3.

  3. Check whether the network between the storage array and server is reachable.

    1. If no, repair the network and wait one minute. If the alarm persists=> Step4.
    2. If yes=> Step4.

  4. Check whether the server is faulty.

    1. If no=> Step5.
    2. If yes=> Step5.

  5. Collect related information and contact technical support engineers.
Updated: 2018-10-19

Document ID: EDOC1000141827

Views: 95663

Downloads: 181

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next