No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Event Reference

OceanStor Dorado V3 Series V300R001

This document is applicable to OceanStor Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. This document describes the basic knowledge about the events of storage system in terms of event definition, event level, impact on the system, possible cause, and handling procedure. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
0xF000A0109 Slow Disk Response

0xF000A0109 Slow Disk Response

Description

A disk responds slowly.

Applicable Model

Applicable to all models.

Attribute

ID

Event Level

Automatically Cleared

0xF000A0109

Major

Yes

Impact on the System

The storage pool that houses the disk may have compromised I/O performance or even degrade.

Possible Causes

  • The disk is faulty.
  • Expansion ports are partially damaged.
  • The disk is incorrectly inserted into its slot.
  • Expansion modules are faulty.
  • Disk enclosure backplanes are faulty.

Procedure

  1. Check whether alarms are generated indicating disk faults.

    1. If yes, replace the faulty disks. If the alarm persists=> Step2.
    2. If no=> Step2.

  2. Check whether any expansion port is faulty.

    1. If yes, replace the interface module where the faulty port resides. If the alarm persists=> Step3.
    2. If no=> Step3.

  3. Check whether the disk is firmly inserted.

    1. If no, reinsert the disk. If the alarm persists=> Step4.
    2. If yes=> Step4.

  4. Check whether alarms are generated indicating expansion module faults.

    1. If yes, replace the faulty expansion modules. If the alarm persists=> Step5.
    2. If no=> Step5.

  5. Collect related information and contact technical support engineers.
Translation
Download
Updated: 2018-10-19

Document ID: EDOC1000141827

Views: 88693

Downloads: 172

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next