No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Event Reference

OceanStor Dorado V3 Series V300R001

This document is applicable to OceanStor Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. This document describes the basic knowledge about the events of storage system in terms of event definition, event level, impact on the system, possible cause, and handling procedure. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
0xF000B0061 FC Link Of Heterogeneous Array Faulty

0xF000B0061 FC Link Of Heterogeneous Array Faulty


The Fibre Channel link of a heterogeneous storage array is faulty.

Applicable Model

Applicable to all models.



Event Level

Automatically Cleared




Impact on the System

Data cannot be transferred over this link. The external LUN may have only one link or fail.

Possible Causes

The link has an error code.


  1. Check the cable connection.

    1. If the cable is not inserted firmly, reinsert the cable. If the alarm persists=> 1.2.
    2. Replace the cable. If the alarm persists=> Step2.

  2. Check whether the optical module resides on the port.

    1. If yes, replace the optical module of the local ports. If the alarm persists=> Step3.
    2. If no=> Step3.

  3. Replace the module where local ports reside. If the alarm persists=> Step4.
  4. Check whether the switch has an error code. If yes, recover the problem. If the alarm persists=> Step5.
  5. Check whether the heterogeneous array has an error code. If yes, recover the problem. If the alarm persists=> Step6.
  6. Collect related information and contact technical support engineers.
Updated: 2018-10-19

Document ID: EDOC1000141827

Views: 94676

Downloads: 181

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next