No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Event Reference

OceanStor Dorado V3 Series V300R001

This document is applicable to OceanStor Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. This document describes the basic knowledge about the events of storage system in terms of event definition, event level, impact on the system, possible cause, and handling procedure. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
0xF0050001 Expansion Module Is Removed

0xF0050001 Expansion Module Is Removed

Description

An expansion module is removed. As a result, the link between the disk enclosure that houses the expansion module and another disk enclosure or a controller enclosure is down.

Applicable Model

Applicable to all models.

Attribute

ID

Event Level

Automatically Cleared

0xF0050001

Major

Yes

Impact on the System

  • If an expansion module is redundantly connected to a disk enclosure or a controller enclosure, the expansion module removal will compromise storage system performance and reliability.
  • If an expansion module is connected to a disk enclosure or a controller enclosure through only one link, the expansion module removal will interrupt the data transmission between the expansion module and the disk enclosure or the controller enclosure.

Possible Causes

The expansion module is removed.

Procedure

  1. Reinsert the expansion module. If the alarm persists=> Step2.
  2. Collect related information and contact technical support engineers.
Translation
Download
Updated: 2018-10-19

Document ID: EDOC1000141827

Views: 84240

Downloads: 166

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next