No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Event Reference

OceanStor Dorado V3 Series V300R001

This document is applicable to OceanStor Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. This document describes the basic knowledge about the events of storage system in terms of event definition, event level, impact on the system, possible cause, and handling procedure. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
0xF00E0003B Remote Device Is Faulty

0xF00E0003B Remote Device Is Faulty

Description

All replication links between the local device and remote device are abnormal.

Applicable Model

Applicable to all models.

Attribute

ID

Event Level

Automatically Cleared

0xF00E0003B

Major

No

Impact on the System

  • If the remote device is disconnected, services such as HyperMetro and remote replication between the local and remote storage arrays are interrupted.
  • If the remote device has been degraded, configuring HyperMetro or synchronous remote replication between storage arrays may decrease system performance and reliability or even affect host services.
  • If the remote device has been degraded, configuring asynchronous remote replication between storage arrays may affect the synchronization speed.

Possible Causes

  • Packet loss, disorder, or bit errors occur on the switch.
  • The remote array is faulty.
  • The service load on the local or remote array is too heavy.

Procedure

  1. Check whether the switch related to the replication link is normal.

    1. If packet loss, disorder, or bit errors occur on the switch, rectify the fault. If the alarm persists=> Step2.
    2. If the switch is normal=> Step2.

  2. Check whether the remote array is faulty or powered off.

    1. If yes, rectify the fault. If the alarm persists=> Step3.
    2. If no=> Step3.

  3. Check whether the service load on the local and remote arrays is too heavy.

    1. If yes, contact technical support engineers for capacity expansion and service optimization.
    2. If no, collect related information and contact technical support engineers.

Translation
Download
Updated: 2018-10-19

Document ID: EDOC1000141827

Views: 84675

Downloads: 168

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next