No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Event Reference

OceanStor Dorado V3 Series V300R001

This document is applicable to OceanStor Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. This document describes the basic knowledge about the events of storage system in terms of event definition, event level, impact on the system, possible cause, and handling procedure. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
0xF01080015 Host Port Has Too Many Bit Errors

0xF01080015 Host Port Has Too Many Bit Errors

Description

A host port has too many bit errors.

Applicable Model

Applicable to all models.

Attribute

ID

Event Level

Automatically Cleared

0xF01080015

Major

Yes

Impact on the System

The application server or other devices cannot communicate with the storage system through the host port. The system performance may be affected.

Possible Causes

  • Cables are not securely connected or damaged.
  • The optical module of the host port or its peer port is faulty.
  • The host port or its peer port is faulty.
  • The interface module where the host port or its peer port resides is faulty.
  • The MTU of the host port and its peer port does not match.

Procedure

  1. Check cables.

    1. If any cable is not securely connected, reinsert it. If the alarm persists=> 1.2.
    2. Replace the cable. If the alarm persists=> Step2.

  2. Check whether optical modules are installed.

    1. If yes, replace the optical modules of the local port and its peer port. If the alarm persists=> Step3.
    2. If no=> Step3.

  3. Replace the modules where the port and its peer port reside. If the alarm persists=> Step4.
  4. If the local and peer ports are ETH/FCoE ports, check whether their MTU values match.

    1. If yes=> Step5.
    2. If no, contact technical support engineers to modify the MTU. If the alarm persists=> Step5.

  5. Check whether the current network is an FC/FCoE switch network.

    1. If yes=> Step6.
    2. If no=> Step9.

  6. Check the cable connection of all links from the remote device to the switch.

    1. If any cable is not securely connected, reinsert it. If the alarm persists=> 6.2.
    2. Replace the cable. If the alarm persists=> Step7.

  7. Replace the optical module of the remote device port and switch port. If the alarm persists=> Step8.
  8. If the remote device port and switch port are FCoE ports, check whether their MTU values match.

    1. If yes=> Step9.
    2. If no, contact technical support engineers to modify the MTU. If the alarm persists=> Step9.

  9. Collect related information and contact technical support engineers.
Translation
Download
Updated: 2018-10-19

Document ID: EDOC1000141827

Views: 84143

Downloads: 166

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next