No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Event Reference

OceanStor Dorado V3 Series V300R001

This document is applicable to OceanStor Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. This document describes the basic knowledge about the events of storage system in terms of event definition, event level, impact on the system, possible cause, and handling procedure. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
0xF01C0005 Remote Replication Consistency Group Failed To Synchronize Data Automatically

0xF01C0005 Remote Replication Consistency Group Failed To Synchronize Data Automatically

Description

A remote replication consistency group fails to synchronize data automatically.

Applicable Model

Applicable to all models.

Attribute

ID

Event Level

Automatically Cleared

0xF01C0005

Major

Yes

Impact on the System

The automatic synchronization of remote replication consistency groups fails to be started. The data on the primary LUN is not synchronized to the secondary LUN in a timely manner, causing data inconsistency.

Possible Causes

  • Storage pool capacity is used up.
  • Links are unstable.

Procedure

  1. Check whether alarms are generated indicating storage system faults.

    1. If yes, perform recommended actions to handle alarms. If the alarm persists=> Step2.
    2. If no, synchronize data manually. If the alarm persists=> Step2.

  2. Check whether cables are working correctly.

    1. If yes=> Step3.
    2. If no, replace faulty optical fibers or network cables to ensure that all links work correctly. If the alarm persists=> Step3.

  3. Collect all related information and contact technical support engineers.
Translation
Download
Updated: 2018-10-19

Document ID: EDOC1000141827

Views: 84720

Downloads: 168

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next