No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Event Reference

OceanStor Dorado V3 Series V300R001

This document is applicable to OceanStor Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. This document describes the basic knowledge about the events of storage system in terms of event definition, event level, impact on the system, possible cause, and handling procedure. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
0xF0CF0005 Abnormal Communication Between Controllers

0xF0CF0005 Abnormal Communication Between Controllers


The communication between controllers in a controller enclosure is abnormal.

Applicable Model

Applicable to all models.



Event Level

Automatically Cleared




Impact on the System

The normal operation of the storage system is not affected.

Possible Causes

  • Controller components are faulty.
  • Backplane components are faulty.
  • Heartbeat connections are down.
  • Mirror links are down.
  • Mirror links have too many bit errors.


  1. Check whether any controller that encounters a communication error is being restarted or powered off.

    1. If yes, wait until the controller is restarted or powered on. If the alarm persists=> Step2.
    2. If no=> Step2.

  2. Replace any controller that encounters a communication error described in the alarm details. If the alarm persists=> Step3.
  3. Reinsert the original controller to the slot and replace another controller. If the alarm persists=> Step4.
  4. Collect related information and contact technical support engineers to replace the controller enclosure.
Updated: 2018-10-19

Document ID: EDOC1000141827

Views: 88852

Downloads: 172

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next