Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
0xF0DD0004 Remote Replication Consistency Group Is Automatically Split
Description
A remote replication consistency group is automatically split.
Applicable Model
Applicable to all models.
Attribute
ID |
Event Level |
Automatically Cleared |
|---|---|---|
0xF0DD0004 |
Warning |
Yes |
Impact on the System
The remote replication consistency group is not synchronized automatically. It must be manually synchronized after the faults are rectified.
Possible Causes
- The capacity of a storage pool that houses the primary LUN or secondary LUN of a remote replication pair in the consistency group is insufficient, or a disk is faulty.
- When remote replication is added to a consistency group in delayed mode, a fault occurs, such as disk failure, link disconnection, and controller reset.
Procedure
- Check whether the capacity of the storage pool that houses the primary LUN or secondary LUN of a remote replication pair in the consistency group is sufficient.
- Check whether an alarm, such as disk failure, link disconnection, and controller reset, is reported.
- If yes, rectify the fault, and then manually synchronize the remote replication consistency group. If the alarm persists after this operation is succeeded=> Step3.
- If no=> Step3.
- Collect all related information and contact technical support engineers.
Previous
