No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Event Reference

OceanStor Dorado V3 Series V300R001

This document is applicable to OceanStor Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. This document describes the basic knowledge about the events of storage system in terms of event definition, event level, impact on the system, possible cause, and handling procedure. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
0xF3C010009 HyperMetro Arbitration Information Conflicts With The Existing Information

0xF3C010009 HyperMetro Arbitration Information Conflicts With The Existing Information

Description

The HyperMetro arbitration information conflicts with existing information. The quorum server has arbitration information that are not about HyperMetro arrays. The registration is forbidden.

Applicable Model

Applicable to all models.

Attribute

ID

Event Level

Automatically Cleared

0xF3C010009

Major

Yes

Impact on the System

After the HyperMetro registration fails, if all replication links between HyperMetro arrays are disconnected, service interruption may occur.

Possible Causes

After the HyperMetro relationship is established between array A and B, if the HyperMetro relationship is removed from array A and a new HyperMetro relationship is established between array A and C, the HyperMetro pair between array A and C fails to be registered on the quorum server.

Procedure

  1. Check whether a HyperMetro relationship is established between array A and B, then the HyperMetro relationship is removed from array A, and a new HyperMetro relationship is established between array A and C.

    1. If yes=> Step2.
    2. If no=> Step5.

  2. Check whether array B is correctly connected to the quorum server.

    1. If yes=> Step3.
    2. If no, rectify the alarm on the link fault=> Step3.

  3. Remove the HyperMetro relationship that only exists on array B.

    1. If the removal succeeds=> Step4.
    2. If the removal fails=> Step5.

  4. Wait 6 minutes. If the alarm persists=> Step5.
  5. Collect related information and contact technical support engineers.
Translation
Download
Updated: 2018-10-19

Document ID: EDOC1000141827

Views: 84607

Downloads: 168

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next