No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

S600-E V200R010C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
FSP_1.3.6.1.4.1.2011.5.25.183.1.22.49 hwPhyStackVlanConflict

FSP_1.3.6.1.4.1.2011.5.25.183.1.22.49 hwPhyStackVlanConflict

Description

FSP/3/VLAN_CONFLICT: OID [OID] [octet] conflicts with the stack reserved VLAN (VLAN ID = [integer]).

The service VLAN conflicts with the stack reserved VLAN.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.183.1.22.49 Minor environmentalAlarm(6)

Parameters

Name Meaning
[OID] Indicates the ID of a MIB object.
[octet] Indicates the services or protocols that conflict with the stack reserved VLAN.
[integer] Indicates the stack reserved VLAN ID.

Impact on the System

The stack reserved VLAN has been used by other service modules. As a result, other devices cannot join the stack.

Possible Causes

When a master/standby switchover occurs in the stack or member switches in the stack restart, and the master switch becomes a standalone switch, the VLAN manually created by users or automatically created by protocols such as VCMP and GVRP is the same as the stack reserved VLAN ID.

Procedure

  1. Run the display stack command to check the stack reserved VLAN ID.
  2. Run the display vlan summary command to check the created VLANs. Determine whether the stack reserved VLAN has been created on the switch.

    • If so, go to step 3.

    • If not, collect alarm information and configuration information, and then contact technical support personnel.

  3. Check whether the stack reserved VLAN ID can be changed to another VLAN ID.

    • If so, run the stack reserved-vlan vlan-id command to change the stack reserved VLAN ID.

    • If not, go to step 4.

  4. Delete the created stack reserved VLAN ID.

    • If the created stack reserved VLAN is Static VLAN, run the undo vlan vlan-id command to delete it.
    • If the created stack reserved VLAN is Dynamic VLAN, run the undo gvrp command to disable the GVRP function.
    • If the created stack reserved VLAN is Rrpp reserved, run the control-vlan command to change the control VLAN of RRPP.
    • If the created stack reserved VLAN is Sep reserved, run the control-vlan (SEP segment view) command to change the control VLAN of SEP.

Translation
Download
Updated: 2019-09-24

Document ID: EDOC1000141873

Views: 155976

Downloads: 15

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next