No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Alarm Handling

S600-E V200R010C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ENTITYEXTTRAP_1. hwEntityHigStateDownNotify

ENTITYEXTTRAP_1. hwEntityHigStateDownNotify


ENTITYEXTTRAP/2/HGSTATEDOWN:OID [oid] Higig port state is always DOWN. (SlotID=[STRING], UnitID=[INTEGER], PortID=[STRING], PeerSlotID=[STRING], MonitorInterval=[STRING])

The HG channel state remains Down.


Alarm ID Alarm Severity Alarm Type Major communicationsAlarm(2)


Name Meaning
OID Indicates the ID of a MIB object.
SlotID Indicates the slot ID.
UnitID Indicates the chip ID.
PortID Indicates the port number of the HG channel.
PeerSlotID Indicates the slot ID of the remote card.
MonitorInterval Indicates the detection interval.

Impact on the System

The HG channel cannot forward packets normally. During inter-card traffic forwarding, packets are lost or cannot be forwarded.

Possible Causes

  • The device is faulty.


  1. Replace the device.
Updated: 2019-09-24

Document ID: EDOC1000141873

Views: 155768

Downloads: 15

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next