No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

S600-E V200R010C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
SCMTRAP_1.3.6.1.4.1.2011.5.25.334.2.1.1 hwSrvServiceExceedThreshould

SCMTRAP_1.3.6.1.4.1.2011.5.25.334.2.1.1 hwSrvServiceExceedThreshould

Description

SCMTRAP/4/SRVRESEXCEED: OID [oid] The service configurations on the device exceed the recommended threshold, which may result in CPU overload. Delete redundant services. (Service ID=[INTEGER], Service Description="[OCTET]", Recommended Threshold=[ULONG])

The service configuration on the device has exceeded the recommended threshold, and the CPU may be overloaded. It is recommended that you delete unnecessary configuration.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.334.2.1.1 Warning qualityOfServiceAlarm (3)

Parameters

Name Meaning
OID Indicates the ID of the alarm MIB object.
Service ID Indicates the ID of the service.
Service Description Indicates description of the service.
Recommended Threshold Indicates the recommended configuration threshold for the service.

Impact on the System

The system CPU may be overloaded, affecting running of services on the device.

Possible Causes

Cause 1: The number of IGMP snooping queriers configured on the device exceeds the recommended threshold (Service Description="IGMP snooping querier").

Cause 2: The number of user VLANs bound to a multicast VLAN exceeds the recommended threshold (Service Description="multicast user VLAN").

Cause 3: The number of user VLANs bound to a multicast VLAN on an interface exceeds the recommended threshold (Service Description="interface-based multicast user VLAN").

Cause 4: The number of interfaces configured with storm control exceeds the recommended threshold (Service Description="storm control interface").

Cause 5: The number of interfaces configured with sFlow exceeds the recommended threshold (Service Description="sFlow sampling interface").

Cause 6: The number of interfaces configured with GVRP exceeds the recommended threshold (Service Description="GVRP interface").

Cause 7: The total limit on the number of MAC addresses configured for port security on interfaces exceeds the recommended threshold (Service Description="port security MAC address").

Cause 8: The number of interfaces configured with DLDP exceeds the recommended threshold (Service Description="DLDP interface").

Procedure

  • Cause 1: The number of IGMP snooping queriers configured on the device exceeds the recommended threshold.

    When this situation occurs for the first time, the device generates an alarm to notify you that the configuration exceeds the recommended threshold. Determine whether to modify the current configuration according to actual service requirements.

  • Cause 2: The number of user VLANs bound to a multicast VLAN exceeds the recommended threshold.

    When this situation occurs for the first time, the device generates an alarm to notify you that the configuration exceeds the recommended threshold. Determine whether to modify the current configuration according to actual service requirements.

  • Cause 3: The number of user VLANs bound to a multicast VLAN on an interface exceeds the recommended threshold.

    When this situation occurs for the first time, the device generates an alarm to notify you that the configuration exceeds the recommended threshold. Determine whether to modify the current configuration according to actual service requirements.

  • Cause 4: The number of interfaces configured with storm control exceeds the recommended threshold.

    When this situation occurs, the device generates an alarm to notify you that the configuration exceeds the recommended threshold. Determine whether to modify the current configuration according to actual service requirements.

  • Cause 5: The number of interfaces configured with sFlow exceeds the recommended threshold.

    When this situation occurs, the device generates an alarm to notify you that the configuration exceeds the recommended threshold. Determine whether to modify the current configuration according to actual service requirements.

  • Cause 6: The number of interfaces configured with GVRP exceeds the recommended threshold.

    When this situation occurs, the device generates an alarm to notify you that the configuration exceeds the recommended threshold. Determine whether to modify the current configuration according to actual service requirements.

  • Cause 7: The total limit on the number of MAC addresses configured for port security on interfaces exceeds the recommended threshold.

    When this situation occurs, the device generates an alarm to notify you that the configuration exceeds the recommended threshold. Determine whether to modify the current configuration according to actual service requirements.

  • Cause 8: The number of interfaces configured with DLDP exceeds the recommended threshold.

    When this situation occurs, the device generates an alarm to notify you that the configuration exceeds the recommended threshold. Determine whether to modify the current configuration according to actual service requirements.

Translation
Download
Updated: 2019-04-18

Document ID: EDOC1000141873

Views: 114074

Downloads: 14

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next