No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

S600-E V200R010C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
L2IFPPI_1.3.6.1.4.1.2011.5.25.42.2.1.7.9 hwPortStickyReachMaxAlarm

L2IFPPI_1.3.6.1.4.1.2011.5.25.42.2.1.7.9 hwPortStickyReachMaxAlarm

Description

L2IFPPI/4/PORTSEC_STICKYMAC_ALARM:OID [OID] the number of [OCTET] reaches the max.

The number of learned sticky MAC addresses or secure MAC addresses reached the threshold.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.42.2.1.7.9 Warning qualityOfServiceAlarm(3)

Parameters

Name Meaning
[OID] Indicates the OID of the alarm.
[OCTET] Indicates the MAC address type: sticky MAC address or secure MAC address.

Impact on the System

No more sticky MAC address entries or secure MAC address entries can be generated.

Possible Causes

The number of learned sticky MAC addresses or secure MAC addresses reached 1024.

Procedure

  1. Run the display mac-address security, display mac-address sec-config, and display mac-address sticky commands to view the dynamic secure MAC address entries, static secure MAC address entries, and sticky MAC address entries. Check whether any sticky or secure MAC entries are invalid.

    • If so, go to step 2.
    • If not, go to step 3.

  2. Run the undo mac-address mac-address [ vlan vlan-id ] command to delete invalid MAC entries. Then check whether the alarm is cleared.

    • If so, no further action is required.
    • If not, go to step 3.

  3. Collect alarm, log, and configuration information, and contact technical support personnel.

Related Information

None

Translation
Download
Updated: 2019-04-18

Document ID: EDOC1000141873

Views: 114105

Downloads: 14

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next