No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Alarm Handling

S600-E V200R010C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
CMD_1. hwSuperChangeFailure

CMD_1. hwSuperChangeFailure


CMD/2/SUPERCHANGE_FAIL:OID [oid] Super change failure.

The current user failed to change the user level.


Alarm ID Alarm Severity Alarm Type Major environmentalAlarm(6)


Name Meaning


Indicates the MIB object ID of the alarm.

Impact on the System

System will not be affected.

Possible Causes

The current user failed to change the user level.


  1. Determine whether the correct password used to change the user level is obtained.

    • If the password is obtained, go to Step 3.

    • If the password is not obtained, go to Step 2.

  2. Run the super password command to configure a password for switching a user from a lower level to a higher level.
  3. Use the correct password to rechange the user level.
  4. End.

Related Information


Updated: 2019-09-24

Document ID: EDOC1000141873

Views: 157668

Downloads: 15

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next