No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Alarm Handling

S600-E V200R010C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
SRM_1. hwOpticalPowerAbnormal 136193

SRM_1. hwOpticalPowerAbnormal 136193


SRM/3/TXPOWER_EXCEEDMAJOR:OID [oid] Optical module exception, Tx power is too high. (EntityPhysicalIndex=[INTEGER], BaseTrapSeverity=[INTEGER], BaseTrapProbableCause=[INTEGER], BaseTrapEventType=[INTEGER], EntPhysicalContainedIn=[INTEGER], EntPhysicalName=[OCTET], RelativeResource=[OCTET], ReasonDescription=[OCTET])

The transmit power of an optical module is too high.


Alarm ID Alarm Severity Alarm Type Minor equipmentAlarm(5)


Name Meaning
OID Indicates the ID of a MIB object.
EntityPhysicalIndex Indicates a physical entity index.
BaseTrapSeverity Indicates the alarm severity.
BaseTrapProbableCause Indicates the error code of the alarm.
BaseTrapEventType Indicates the event type.
EntPhysicalContainedIn Indicates contained physical entity code.
EntPhysicalName Indicates the physical entity name.
RelativeResource Indicates a sub-entity.
ReasonDescription Describes reason of the fault.

Impact on the System

This alarm does not affect system operating if the interface on which the optical module is installed works properly.

Possible Causes

The transmit power of the optical module is too high.


  1. Run the display transceiver slot slot-id verbose command in the system view to check whether the transmit power Tx Power of the optical module is within the allowed range.

    • If the transmit power is in the allowed range, services are not affected. Collect alarms, logs, and configurations and contact technical support personnel.
    • If the transmit power is out of the allowed range, replace the optical module. Connect an attenuator to the optical module. If the receive power is in the allowed range and services are not affected, the optical module can be used. This alarm alerts you to check the transmit power of optical modules.

Updated: 2019-09-24

Document ID: EDOC1000141873

Views: 156965

Downloads: 15

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next