No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

S600-E V200R010C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
HWCM_1.3.6.1.4.1.2011.6.10.2.2 hwCfgOperateCompletion

HWCM_1.3.6.1.4.1.2011.6.10.2.2 hwCfgOperateCompletion

Description

HWCM/4/CFGCOPY:OID [oid] Configure copy. (OperationIndex=[integer], OperationResultIndex=[integer], OperationType=[integer], OperationTime=[timetick], OperationState=[integer], OperationEndTime=[timetick])

The trap was generated when the configuration was complete. The configuration includes:
  1. Uploaded the configuration file from the PC and then delivered the configuration file.

  2. Downloaded the current configuration from the system to the PC.

  3. Saved the current configuration to the device.

  4. Ran the configuration file.

  5. Uploaded the configuration file from the PC but did not deliver it.

  6. Downloaded the configuration file from the system to the PC.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.6.10.2.2 Warning processingErrorAlarm(4)

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

OperationIndex

Indicates the operation index.

OperationResultIndex

Indicates the index of the operation result.

OperationType

Indicates the operation type.

OperationTime

Indicates operation time.

OperationState

Indicates the operating status.

OperationEndTime

Indicates end time of an operation.

Impact on the System

If the configurations are delivered to and performed successfully on the device, the current configuration on the device will be changed. The impacts on the current configuration depend on the specific configuration that is delivered.

Possible Causes

The trap was triggered when the NMS of the device performed the following operations. The trap was used to record the configuration results. Operations included:

  1. Uploaded the configuration file from the PC and then delivered the configuration file.

  2. Downloaded the current configuration from the system to the PC.

  3. Saved the current configuration to the device.

  4. Ran the configuration file.

  5. Uploaded the configuration file from the PC but did not deliver it.

  6. Downloaded the configuration file from the system to the PC.

Procedure

  1. This alarm message is informational only, and no action is required.

Related Information

None

Translation
Download
Updated: 2019-04-18

Document ID: EDOC1000141873

Views: 127834

Downloads: 14

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next