No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

S600-E V200R010C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
L2IF_1.3.6.1.4.1.2011.5.25.42.3.1.4.6 hwVlantransCountExceedThreshold

L2IF_1.3.6.1.4.1.2011.5.25.42.3.1.4.6 hwVlantransCountExceedThreshold

Description

L2IF/4/VLANTRANS_COUNT_THRESHOLD: OID [oid] The number of vlan mapping or vlan stacking configurations on the interface exceeded the upper threshold. (PortIndex=[INTEGER], UpperThreshold=[INTEGER])

The number of VLAN mapping configurations, VLAN stacking configurations, or both on the interface exceeded the upper threshold.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.42.3.1.4.6 Warning other (1)

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

PortIndex

Interface index

UpperThreshold

Upper threshold for the number of VLAN mapping configurations, VLAN stacking configurations, or both on the interface

Impact on the System

Services will not be affected.

Possible Causes

The number of VLAN mapping configurations, VLAN stacking configurations, or both on the interface exceeded the upper threshold.

Procedure

  1. Check whether all interfaces having port vlan-stacking and port vlan-mapping configurations are Up and available and have traffic, and whether all VLAN mapping or VLAN stacking configurations have taken effect. Run the undo port vlan-mapping and undo port vlan-stacking commands in the corresponding interface view to delete ineffective VLAN mapping or VLAN stacking configurations. Check whether the alarm is cleared.

    • If the alarm is cleared, go to Step 3.
    • If the alarm persists, go to Step 2.

  2. Collect alarm information and configuration information, and then contact technical support personnel.
  3. End.
Translation
Download
Updated: 2019-09-24

Document ID: EDOC1000141873

Views: 157107

Downloads: 15

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next