No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

S600-E V200R010C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
SRM_1.3.6.1.4.1.2011.5.25.129.2.1.9 hwEntityInvalid 68080

SRM_1.3.6.1.4.1.2011.5.25.129.2.1.9 hwEntityInvalid 68080

Description

SRM/3/ENTITYINVALID:OID [oid] I2C is abnormal. (EntityPhysicalIndex=[INTEGER1], BaseTrapSeverity=[INTEGER2], BaseTrapProbableCause=[INTEGER3], BaseTrapEventType=[INTEGER4], EntPhysicalContainedIn=[INTEGER5], EntPhysicalName=[OCTET1], RelativeResource=[OCTET2], ReasonDescription=[OCTET3])

The I2C was faulty.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.129.2.1.9 Minor equipmentAlarm(5)

Parameters

Name Meaning
OID Indicates the ID of a MIB object.
EntityPhysicalIndex Indicates the index of an entity.
BaseTrapSeverity Indicates the alarm severity.
BaseTrapProbableCause Indicates the possible causes of an alarm.
BaseTrapEventType Indicates the type of an alarm.
EntPhysicalContainedIn Indicates the index of a parent entity.
EntPhysicalName Indicates the name of an entity.
RelativeResource Indicates the entity-related resources.
ReasonDescription Indicates the reason description of an alarm.

Impact on the System

One or more interfaces do not work normally.

Possible Causes

The I2C has failed.

Procedure

  1. Switch services from the interfaces affected by the I2C failure to interfaces that can work normally. If you still want to use an affected interface, rectify the I2C fault, and then run the clear configuration interface interface-type interface-num command to clear interface configuration and reconfigure the interface.
  2. If the fault cannot be rectified and services cannot be switched to normal interfaces, replace the device.
Translation
Download
Updated: 2019-09-24

Document ID: EDOC1000141873

Views: 156961

Downloads: 15

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next