No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Alarm Handling

S600-E V200R010C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
IFNET_1. hwEntityExtCfmOverCard

IFNET_1. hwEntityExtCfmOverCard


IFNET/4/IF_CARD_CFMOVER: OID [oid] The configuration of the interface card is restored. (CardName=[STRING])

The configuration of the interface card was restored.


Alarm ID Alarm Severity Alarm Type Warning other(1)


Name Meaning


Indicates the MIB object ID of the alarm.


Indicates the name of the interface card.

Impact on the System

After the configuration of the interface card is restored, the interface card is usable.

Possible Causes

The entire device or the interface card was restarted.


  1. This alarm information is informational only, and no action is required.

Related Information


Updated: 2019-09-24

Document ID: EDOC1000141873

Views: 155934

Downloads: 15

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next