No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

S600-E V200R010C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
SRM_1.3.6.1.4.1.2011.5.25.129.2.1.9 hwEntityInvalid 68073

SRM_1.3.6.1.4.1.2011.5.25.129.2.1.9 hwEntityInvalid 68073

Description

SRM/4/UsbPlugIn:OID [oid] u-disk plug in. (EntityPhysicalIndex=[INTEGER1], BaseTrapSeverity=[INTEGER2], BaseTrapProbableCause=[INTEGER3], BaseTrapEventType=[INTEGER4], EntPhysicalContainedIn=[INTEGER5], EntPhysicalName=[OCTET1], RelativeResource=[OCTET2], ReasonDescription=[OCTET3])

The USB disk was inserted.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.129.2.1.9 Critical equipmentAlarm(5)

Parameters

Name Meaning
OID Indicates the ID of a MIB object.
EntityPhysicalIndex Indicates the index of an entity.
BaseTrapSeverity Indicates the alarm severity.
BaseTrapProbableCause Indicates the possible causes of an alarm.
BaseTrapEventType Indicates the type of an alarm.
EntPhysicalContainedIn Indicates the index of a parent entity.
EntPhysicalName Indicates the name of an entity.
RelativeResource Indicates the entity-related resources.
ReasonDescription Indicates the reason description of an alarm.

Impact on the System

A USB flash drive is used only for USB-based deployment. When a device is running normally, connecting an unknown USB flash drive may cause exceptions such as restart of the device or change of configuration.

Possible Causes

A USB flash drive has been installed on the device.

Procedure

  1. Determine whether the USB flash drive is installed for an upgrade of the device. If so, ignore the alarm. If not, remove the USB flash drive.
Translation
Download
Updated: 2019-09-24

Document ID: EDOC1000141873

Views: 155058

Downloads: 15

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next