No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

S600-E V200R010C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ENTITYTRAP_1.3.6.1.4.1.2011.5.25.219.2.4.9 hwOpticalUnAuthorized 136192

ENTITYTRAP_1.3.6.1.4.1.2011.5.25.219.2.4.9 hwOpticalUnAuthorized 136192

Description

ENTITYTRAP/3/OPTICALUNAUTHORIZED:OID [oid] The optical module was not certified by Huawei Ethernet Switch.(Index=[INTEGER], EntityPhysicalIndex=[INTEGER], PhysicalName="[OCTET]", EntityTrapFaultID=[INTEGER], EntityTrapReasonDescr="[OCTET]")

An optical module installed on the device is not a Huawei-customized optical module.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.219.2.4.9 Minor equipmentAlarm(5)

Parameters

Name Meaning
OID Indicates the ID of the MIB object.
Index Indicates the index.
EntityPhysicalIndex Indicates the index of the physical entity.
PhysicalName Indicates the name of the physical entity.
EntityTrapFaultID Indicates the error code of the alarm.
EntityTrapReasonDescr Indicates the description of the alarm cause.

Impact on the System

If this optical module was delivered from Huawei early, this alarm does not affect the system. If not, the optical module may not work normally.

Possible Causes

The optical module is not a Huawei-customized optical module. Vendor information of the early delivered Huawei optical module is not recorded.

Procedure

  1. If this optical module was delivered from Huawei earlier, run the transceiver phony-alarm-disable command to disable the alarm function for non-Huawei customized optical modules.
  2. If this optical module is not delivered from Huawei or is not customized for Huawei, replace it with a Huawei-customized optical module.

Related Information

None

Translation
Download
Updated: 2019-04-18

Document ID: EDOC1000141873

Views: 113857

Downloads: 14

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next