No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Alarm Handling

S600-E V200R010C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
FSP_1. hwStackSystemMacChange

FSP_1. hwStackSystemMacChange


FSP/4/STACK_MAC_CHANGE: OID [oid] Stack system's MAC address changes to slot [integer]'s MAC address [octet].

When the master switch in the stack system changed, the MAC address of the stack system was switched to the MAC address of the new master switch if the MAC address switching function was enabled in the stack system. In this case, this alarm was generated.


Alarm ID Alarm Severity Alarm Type Warning equipmentAlarm(5)


Name Meaning
[OID] OID of the MIB
[integer] Stack ID of the device generating the alarm
[octet] New MAC address currently used by the stack system

Impact on the System

The entries are refreshed in the stack system, which results in the temporary interruption of services. After the entries are refreshed, services recover.

Possible Causes

The master switch in the stack system changed.


  • No action is required.

Related Information


Updated: 2019-09-24

Document ID: EDOC1000141873

Views: 157891

Downloads: 15

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next