No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

S600-E V200R010C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
L3MB_1.3.6.1.4.1.2011.5.25.227.2.1.6 hwBoardL3FwdResLackResume

L3MB_1.3.6.1.4.1.2011.5.25.227.2.1.6 hwBoardL3FwdResLackResume

Description

L3MB/4/FwdResResume:OID [OID] The layer 3 resource usage is restored to be lower than [Threshold]%.(EntPhysicalindex=[GAUGE],EntPhysicalName=[OCTET],Slot=[OCTET],ResourceType=[INTEGER])

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.227.2.1.6 Warning equipmentAlarm(5)

Parameters

Name Meaning
OID Indicates the MIB object ID of the alarm.
Threshold Indicates the lower threshold of the layer 3 resource usage.
EntPhysicalindex Indicates the index of the physical entity.
EntPhysicalName Indicates the name of the physical entity.
Slot Indicates the slot ID.
ResourceType Indicates the ID of a Layer 3 resource.
  • hostTablePrefixTable(27) indicates the host route prefix entry.
  • routingTablePrefixTable(28) indicates the IPv4 route prefix entry.
  • ecmpNextHopTable(29) indicates the next hop entry of the equal-cost route.
  • layer3InterfaceTable(30) indicates the Layer 3 outbound interface entry.
  • nextHopTable(31) indicates the next hop entry.
  • tunnelDecapsulationTable(32) indicates the tunnel encapsulation and decapsulation entry.
  • ipv6RoutingTablePrefixTable(47) indicates the IPv6 route prefix entry.

Impact on the System

Services are not affected.

Possible Causes

The Layer 3 resource usage was restored to be lower than the lower threshold.

Procedure

  1. This alarm is informational only, and no action is required.

Related Information

None

Translation
Download
Updated: 2019-04-18

Document ID: EDOC1000141873

Views: 113860

Downloads: 14

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next